Mackie SRM215 V-Class 2,000W 15″ Powered Speaker 15 in.

Description

The Mackie SRM215 V-Class 2,000W 15 powered speaker is the largest in the Mackie line-up of V-Class loudspeakers. It shares the same power section and advanced features of the 10 and 12 models, but the SRM215s bigger 15 woofer is able to handle frequencies as low as 40Hz, with a maximum sound pressure level of 136dB. In spite of its larger size, the SRM215 is easy to transport and weighs just under 49 pounds. If extra low end and more volume is what you need, the 15 SRM215 is the right powered speaker to choose.

Advanced Impulse DSP module
The goal of Mackies Advanced Impulse DSP is to remove all the anomalies that loudspeakers and horns contribute to a signal, from honkiness or squelch to “mushy” low end, effectively making the drivers “invisible” and output nothing but clean sound. By more intelligently (and more thoroughly) employing the benefits of FIR filtering, Advanced Impulse DSP eliminates undesired acoustic anomalies across the entire dispersion zone (horizontal and vertical), as well as frequency range and time domain.

SYM-X horn
The custom horn within each SRM | V-Class speaker was designed with the goal to bring out the very best from the HF transducer, while maintaining the flattest response possible at the crossover point. The special design of this horn allows the polymer compression driver to operate at near maximum efficiency. This means it gets louder and sounds better with less effort. The transition between the LF and HF is a symmetrical, flat response, which is what helps make the smooth midrange in V-Class speakers possible.

Transparent system protection
Other loudspeakers feature some sort of protection and limiting to help them squeeze a dB or two out of the speaker. This is almost always at the expense of sound quality and is commonly experienced as diminished bass response and the “pumping” sound of the internal limiter having a bad day.

V-Class is all about reliable performance without sacrificing sound quality, even when pushed to the max. Packed with cutting-edge amplifier protection that not only keeps the electronics and transducers safe from any harm, it does so with a dramatically less effect on the tonal balance and sound quality. When operating at very high levels, the processor-controlled system monitoring analyzes the audio signal and identifies the problem areas, then dynamically applies multi-band compression to those specific frequencies rather than lowering the overall output. This keeps your levels where you want them and maintains the sound quality you expect.

Wireless control and streaming
With the SRM Connect app available for iOS and Android devices, you get complete control over everything and then some for up to 2 speakers simultaneously. Quickly access levels, EQ, meters, and configuration. Plus, you can save memory presets to streamline setup at your next gig. When you link to another SRM | V-Class speaker, you get control over the entire system in the app, all in one view. No additional pairing or swapping back and forth on your device is required. For a simple music playback system, you can stream music directly from any Bluetooth enabled device.